Webasto Air Top heater Timer 24v
3 programs, are established day (weeks), time of inclusion and operating time (10-120 min.)
Applicability:
- Webasto Heater Air Top 2000
- Webasto Heater Air Top 2000S
- Webasto Heater Air Top 2000ST
- Webasto Heater Air Top 3500
- Webasto Heater Air Top 5000
- Webasto Heater Air Top 3500ST
- Webasto Heater Air Top 5000ST
- Webasto Heater Air Top EVO 3900
General instructions |
The moment of turning on of the heater can be precisely determined on any time of day from 00.01 to 24.00 in any of the next 7 few days. It is possible to determine up to 3 moments of inclusion, but it will only 1 be activated from them. By pressing the button of direct inclusion the heater works continuously until this button is pressed again. The standard timer has function of the alarm clock. At the included ignition the timer shows the current time and day of the week. If the heater is switched on, the display and buttons are highlighted. After connection of current to not adjusted display timer all symbols blink (it is necessary to determine time of day and day of the week). |
Setup of the timer |
Values of all blinking symbols can change by pressing of buttons < and >. f during 5 sec. not to press the button again, time highlighted at the same time on the display is entered into memory. If on the button < or > to press longer 2 sec., "the fast course" of change is activated. |
Turning on of the heater |
Manually: by pressing the button of direct inclusion ( Automatically: by preliminary installation of the time of inclusion. |
Turning off of the heater |
Manually: by pressing the button of direct inclusion ( Automatic switching off: upon termination of duration of work established on the timer or (in the mode of continuous work) by installation of the remained operating time. |
Setup Time/Day |
Press button |
Conclusion of the current time |
At the included ignition: it is displayed. At the switched-off ignition: to press the button |
Installation of the inclusion time |
Press button "Р". When the turn of the programme on the display begins to blink, determine time of the beginning of heating by means of buttons < and >. After that designation of day of the week will begin to blink: to establish the necessary day. Then to press the button "P" (there is a transition to the program 2, by one more pressing of the button "P" - to the program 3, at the third - in the mode of the current time). |
Conclusion / deleting of programs |
To press the button P until on the display the necessary turn of the programme appears. For deleting of this program to press repeatedly the button "P" until on the display the current time, but without turn of the programme is highlighted. |
Installation of duration of work |
At the switched-off heater to press the button < during 3sec. When the value of duration work begins to blink, establish by button <or > the necessary value (from 10 to 120 min.). |
Installation of residual time |
Residual time - time during which the heater continues to work. It can be changed only at the working heater and the switched-off ignition in the range from 1 to 120 min. by pressing of the button < or >. |
Installation of the alarm clock (only for No.88204 and 88195) |
Only reaction time, but not day of the week is programmed. To press repeatedly the button "P" until on the display the hand bell symbol appears " To determine by buttons < and > the necessary time. The alarm clock is switched off in 5 min. or when pressing any button. |
Conclusion/deleting of time incl. the alarm clock |
To repeatedly press a naknopka "P" until on the display the hand bell symbol appears " To erase him, it is necessary to press the button "P" until the hand bell symbol " |
Installation of temperature |
Range of regulation is from +5 to +35 S. Only for timers (Part No.88205 and 88206) when sharing with air heaters. |
Indication of temperature on the display |
For a conclusion of temperature it is necessary to press twice the button " This function is compatible to timers of Part No.88204, 88195, 88206, 88205 (when using the thermal sensor of Part No.66052). |
).
during 2 sec. When the value of time on the display begins to blink, establish the necessary value by means of buttons < and >. After that designation of day of the week will begin to blink – to determine the necessary day of the week.
".
1 Jumper
2 Plus plug 15
3 Plus plug 30
4 Plus plug 31
5 Plus plug 58
| Manufacturer | Webasto |
| Country of origin | Germany |
| Weight | 0.5 kg |
Webasto Air Top heater Timer 24v reviews
Be the first to write a review of this product!
