Diagnostic stand

Buy Diagnostic stand

Model 201438300001 Diagnostic stand 201438300001 20.1438.30.0001 20 1438 30 0001

201438300001
In stock
$362

APPOINTMENT

1. The stand allows you to:

1.1 Checking the operability of the heaters produced by Eberspacher Climate Control Systems GmbH & Co.: - Liquid pre-engine heaters:

HYDRONIC B / D 4/5 kW - heaters of other models produced by Eberspacher (HYDRONIC, HYDRONIC II, HYDRONIC M, HYDRONIC M II, AIRTRONIC M air heaters).

The kit includes the bracket only for attaching the HYDRONIC liquid heater and the wiring for its connection to the stand!

1.2. Monitoring of current and voltage consumption of the tested heater in the required range.

1.3 Using the EDiTH-Basic diagnostic tool (order number 22 1541 89 0000, not included in the scope of supply, sold separately), it is possible to display the parameters of the heater operation on the PC:

- reading of errors of the control unit;

- indication of operating modes and indicators;

- determination of the heater's working capacity for altitude above sea level;

- indication of heater parameters;

- IPCU programming (order number 22 1000 32 7400, not included in the scope of supply, it is purchased separately);

1 - the possibility of printing a report on checking the operation of the heater and the ability to record and then reproduce all modes of operation.

The diagnostic stand includes the following units and devices:

Name of equipment Quantity per set, pcs.
Electrical equipment
Voltmeter M42301 0-30V 1
Ammeter M42301 0-30A 1
Socket on the panel 10-0020 red 1
Socket on the panel 10-0020 black 1
Nest 6,3 mm tinned 4
Toggle switch KN-3C-103AP 1
Toggle switch KN-3C-201A 1
6-pin connector. (standard) 1
Fuse TESLA FT 20A 1
Fuse TESLA FT 5A 1
Shunt 30A 75 MV 1
Shunt wire for mini-stand 2
Fasteners and others
BOLT 6x10 4
BOLT 8x16 4
BOLT 8x30 4
BOLT 8x50 2
Screw with a cylindrical head M4x20 2
Screw M4x25 2
Connecting pipe Brass Cat. No. 20 1528 88 0003 2
Capacity for fuel PSF-642 0.5 liter. (OE70 mm x182 mm) 2
Plastic pipe plug 20x20 8
PO Ball valve 1/2 "FF (T) 2
Set of cooling nipples (OE18 mm internal) 1
Exhaust pipe OE24 (L = 800 mm.) Cat. No. 25 1774 89 1400 1
Fuel line Cat. No. 890 31 118 1
Rubber adapters Cat. No. 360 75 300 2
Mini diagnostic test towel 1
Wiring for mini stand 1
Bracket for dosing pump for 5 and 10 kW. Cat. No. 22 1000 50 0300 1
Base parts kit 1
Heater bracket Cat. No. 25 2220 80 0001 1
Note! The fuel pump and the liquid pump are not supplied, they are sold separately.

Weight 25 kg

Tags: 201438300001 Diagnostic stand

Diagnostic stand reviews

Be the first to write a review of this product!