Additional equipment set TT-Evo to TT-Z

Buy Additional equipment set TT-Evo to TT-Z

Part No.1320077A Alternative parts No.1315908C / 1315908D

1320077A
In stock
$247.33

At a temperature on the street it is below +3-5 degrees Celsius, and on the started car – the Thermo Top Evo prestarting heater will work as a heater.

ATTENTION: Activation of function of a heater in the prestarting heater of the Thermo Top Evo 4/5 Diesel or Benzin series requires the next equipment:
1. Set of additional equipment No.1315908
2. The diagnostic Webasto adapter - USB or COM
3. Thermo Top Evo 4/5 preheater diesel/gasoline

1. Get a dangl-key from a set of additional equipment identification number 1315908 and insert it into USB port of the computer from which we will make additional equipment.
Insert the CD disk delivered in a set of additional equipment into CD ROM

2. If this device wasn't installed on the computer earlier, the computer identifies him as the new device. If the device is already installed, you can pass to point No. 12 of this instruction

3. Will begin installation of this device

4. The master of the new equipment will open

5. We refuse search of the software on the Windows Update hub, and we press the "next" button

6. Choose "Installation from the specified place" and press the "next" button

7. Choose "To execute search of the most suitable driver in the specified places", we press the Browse button

8. The CD disk delivered in an additional equipment set has to be inserted into CD ROM, choose a way to the drivers folder on this disk and we press "OK"

9. In line will appear – E:\drivers where E letter of a disk. Later we press the Further button

10. Installation of the driver will begin, wait for the end

11. After the end of installation press the button "Ready"

12. Connect the diagnostic Webasto adapter to the installed and powered Thermo Top Evo heater.

13. Open the root folder of a CD disk in the browser, choose and start the file with a name - Aufruestung

14. In the opened window choose the necessary language (flag), the instruction on the basis of English.

15. The program asks us to study the instruction (Manual) we agree, and presses the "Manual" button

16. Read the instruction and we press the OK button

17. Next the program asks us – to Start updating? also the "Upgrade" button will become available, press it.

18. If the window with a mistake – "No communication …" the problem with communication of the diagnostic equipment, the heater and the computer means at you, check all wires (if necessary disconnect and anew connect everything) and repeat attempt of updating from point No.12 of this instruction.

19. Process of updating of the software of the heater will begin, in this process don't disconnect a wire at all, don't cut off power the diagnostic adapter if process is torn off, then the heater will fail.

20. Wait for the end of updating, the window with confirmation of successful updating will appear, press the OK button

Process of updating is complete

Dangl-klyuch – disposable, after updating of the software he won't work on one heater. Such message says that the key is already used and it is necessary to get a new set of additional equipment

Connect the plait of wires delivered in a set (the scheme is enclosed in each set)

Process of additional equipment is finished. At a temperature on the street it is below +3-5 degrees Celsius, and on the started car – the Thermo Top Evo heater will work as a heater.

Manufacturer Webasto
Country of origin Germany
Weight 0.8 kg

Additional equipment set TT-Evo to TT-Z reviews

Be the first to write a review of this product!