Heat exchanger for Air Top 3500/5000 ST
Heat exchanger.
Heat received at fuel combustion is transferred in the heat exchanger to a stream of the air given by the air motor.
Replacement of the heat exchanger.
Dismantling.
1. To remove the heater.
2. To disassemble the case.
3. To remove the control unit.
4. To remove the overheating sensor.
5. To remove the air motor.
6. To remove a burner tube.
7. To unscrew 2 self-tapping screws and to take a spherical pipe from the heat exchanger.
8. To remove round consolidation from the heat exchanger and to check his state.
Installation.
1. To place new consolidation in a heat exchanger groove.
2. To establish a spherical pipe and to fix by 2 screws from outer side.
3. To tighten self-tapping screws with the moment of 4+0,4 Nanometers.
4. To establish a burner.
5. To establish the air motor.
6. To install the control unit.
7. To install the overheating sensor.
8. To assemble the case.
9. To install the heater.
| Manufacturer | Webasto |
| Country of origin | Germany |
| Weight | 1 kg |
Heat exchanger for Air Top 3500/5000 ST reviews
Be the first to write a review of this product!
