Fan control unit (IPCU) for Opel, Chevrolet
Opel: Zafira, Meriva, Mokka, Astra, Insignia
Chevrolet: Orlando, Cruze
Instruction for installation
1321695A– The electronic module the CAN adapter for inclusion of climatic installation of the car of brand of Opel: Zafira, Meriva, Mokka, Astra, Insignia and Adam and Chevrolet: Orlando, Cruze
When using this module it isn't necessary to break off power supply of the regular block of climate control or gates. This way of connection caused various failures in work of regular climate control.
Preparation of the CAN module:
To insert into a wire Can-module soccet with the plugs which are previously pressed out on them:
Red (rt), Brown (br) and Green-white (gn-ws) are connected to a plait from the heater, according to the electrical circuitry. The yellow wire is connected to the low-speed cable (a green wire from the 1st contact in the OBD socket)
Attention:
At installation and connection of the CAN module of joint stock bank it has to be disconnected, otherwise the module can leave from standing!
Maintenance instruction
Before withdrawal from the car the user needs to expose the maximum temperature of the heater of salon (for all zones) and to expose the direction of blowing on a windshield (moves of these gates the CAN adapter can automatically work not at all complete sets of the car of Opel/Chevrolet)
| Manufacturer | Webasto |
| Country of origin | Germany |
| Weight | 0.3 kg |
Fan control unit (IPCU) for Opel, Chevrolet reviews
Be the first to write a review of this product!
