Eberspacher HYDRONIC D5W SC (Compact) 252653050000
The pre-launch HYDRONIC D5W SC 12B heater will become for you simply irreplaceable assistant. If you at least once had to warm up in the frosty morning the engine, freezing in salon, you appreciate this device!
Rated voltage — 12 V. Model are suitable for cars, pickups and motor vans the sbenzinovy engine from 2 to 5 liters. The governing body isn't included in the package of delivery and is acquired separately. The complete set included a mounting kit.
Additional explanations from our technical department concerning a set 25.2653.05.0000 are lower - D5 WS C is 12 Century old. Features of a set 25.2653.05.0000
1. The heater At this set is present the heater 25.2219.05.0000, as well as at standard. Available and heater bracket, therefore here perfect analogy to a standard set.
2. Fuel system. The difference of a fuel system of this set is that a fuel-supply line of smaller are long (3 m). In a standard set of a diesel compact 25.2390.05.0000 fuel tube of long 6 m. Instead of a toplivozabornik - the fuel T-coupler. All collars for the fuel highway are. 3. Exhaust system. Unlike a standard set, in given the exhaust branch pipe is shorter (0,4 m) instead of 1 m. For the rest all component parts are.
4. Air intake. It is absolutely identical to a standard set 25.2390.05.0000.
5. Electrician. In this set there is no plait of connection of the heater to the car and burn down connections to the car fan. For connection of the heater there is a special plait 44-3728090-10. However, pay attention that this plait has no possibility of connection to the fan of salon (it has safety locks only under the heater and a control device). To make connection to the fan of the car it is necessary "to knit" separately a plait (an analog of standard).
6. Liquid system. Unlike a standard set 25.2390.05.0000 in a set 25.2653.05.0000 plugs for connection of liquid hoses of 18/15 mm (in the standard 18/18 of mm).
7. Carriers In this set are absent screws, nuts, tab washers.
Operation principle of HYDRONIC D5W SC.
At inclusion the indicator bulb in an element of management lights up. The water pump is started. According to the set course of the program the air supply pump in a combustion tube, the heat candle and the dosing pump starting a combustion process is started. At formation of stable process of burning through
certain time bayonet an electrode of incandescence is disconnected.
Depending on the necessary heating temperature change of productivity of the heating device on steps is carried out: HIGH – SMALL – OFF (a regulation pause). At the same time temperature thresholds are rigidly programmed in an electronic control unit. If the need for heating at a step "SMALL" it is so small that temperature of cooling liquid reaches 85 °C, then the heating device passes to a step "OFF". There is an inertial runout within about 120 seconds, then the heating device is switched-off (a regulation pause). The control lamp burns, and the water pump also continues to work during a regulation pause.
| Weight | 8 kg |
Eberspacher HYDRONIC D5W SC (Compact) 252653050000 reviews
Be the first to write a review of this product!
