Control unit for Air Top Evo 5500 12V Petrol

Buy Control unit for Air Top Evo 5500 12V Petrol

Part No.1313135A State - new

1313135A
In stock
$665.83

Control unit.

The control unit regulates operation of the heater and controls process of combustion according to indications of sensors of a flame, air temperature on an entrance and an exit from the heater, position of the handle of a temperature regulator. The built-in sensor of temperature can be replaced external. At malfunction emergence the control unit makes diagnostics of the heater and gives a malfunction code. Depending on a heater complete set, on the display of the kombi-timer (in the form of figures) or on the switch indicator (in the form of a block code – blinking). Besides, diagnostics of the heater can be carried out, using the diagnostic adapter and the personal computer.

Replacement of the control unit.

Dismantling:

1. To remove the heater.

2. To disassemble the case.

3. To disconnect all plugs on the control unit.

4. To unscrew self-tapping screws.

5. To shift the control unit in the direction of the air motor and to take out up it.

6. To carry out works with the removed components.

Instruction: The control unit isn't subject to repair work.

Installation:

1. To put on the control unit on the air motor, to shift in the direction of the heat exchanger and to fix by screws.

2. To tighten self-tapping screws with the moment of 3.0+0,3 Nanometers.

3. To connect all plugs on the control unit.

4. To assemble the case.

5. To install the heater.

6. To check the CO2 level and to adjust if necessary.

ATTENTION! blower motor fan has to be free from foreign objects.

Manufacturer Webasto
Country of origin Germany
Weight 0.5 kg

Tags: 1313135A

Control unit for Air Top Evo 5500 12V Petrol reviews

Be the first to write a review of this product!