External temperature sensor
For remote control of air temperature the set No. 66052 is used.
We will combine the thermal sensor with kombi-timers No. 88204, 88195, 88206, 88205.
Indication of temperature is reflected in the display. For a conclusion of temperature it is necessary to press twice the button.
Instruction! On the electrical circuitry only connection of the external temperature sensor is shown.
Thermal sensor arrangement:
• It isn't necessary to have near a source of heat or a stream of hot air.
• The thermal sensor as a rule settles down at average height in a cabin of the car on a vertical surface.
• The installation site has to be protected from direct sunshine.
• It isn't necessary to establish in places where restriction of the movement of air near the sensor is possible (on an example near a curtain).
Installation.
For connection of the sensor it is necessary to use two wire plait (section of the conductor of 0,75 mm 2) necessary are long. At production of a plait it is necessary to use the contacts and rubber consolidations which are included in the package (from the sensor) and contacts for connection to a block on the kombi-timer. The polarity of connection doesn't matter. For pressure testing of contacts to use the corresponding tool. Connections of a plait on the 12th contact socket kombi-the timer are used contacts 3 and 5.
Check of functionality:
• The first pressing the button with a symbol leads to indication of the current time.
• The second pressing a conclusion of indication of air temperature near the thermal sensor.
Delivery set:
1. thermal sensor
2. a block with a clamp
3. assembly self-tapping screws
4. sealing rubber plugs
5. plugs for a block kombi-the timer and a plait
| Manufacturer | Webasto |
| Country of origin | Germany |
| Weight | 0.1 kg |
External temperature sensor reviews
Be the first to write a review of this product!
