Additional equipment ТТ-С to ТТ-Z
The heater thermoswitch (at a temperature below +5grad C) with an assembly set
It is used for automatic start of the Webasto Thermo Top or Eberspacher Hydronic heater at the switched-on engine and and temperature below +5 degrees Celsius.
Set for re-equipment of the Thermo Top E/C or Hydronic heater in a heater.
Set of additional equipment identification number 65954
serves for automatic activation of governing bodies as the -91st, -T100 or to -TC4
Turning on of the TTEvo heater is made by W-bus a signal. This signal can be received from T91, T100 or TC4 giving of the operating analog signal on the corresponding contact of the reception module.
Reheating is carried out up to the temperature of cooling liquid of 80-84 0C, (limited by settings of the heater) and further maintenance of the specified temperature at the included ignition / the started engine.
The set of additional equipment allows to warm up effectively inside of the car operating the heater. His circulation pulser which increases the speed of passing of heated cooling liquid via the oven (ovens) of salon thereby continuously works for the switched-on heater promoting acceleration of their warming up.
The set of additional equipment starts the heater when performing both conditions:
1. ignition is included / the engine is started
2. ambient temperature is lower than +5 degrees With
Manufacturer | Webasto |
Country of origin | Germany |
Weight | 0.5 kg |
Additional equipment ТТ-С to ТТ-Z reviews
Be the first to write a review of this product!