Nozzle for DW/Thermo 350
Applicability:
- Thermo 350
- DW 350
- DBW 350
| Производительность | 1 USgal/h |
| USgal/h параметры | 7 бар, 3.4 сСт, 820 кг/м? |
| Производительность | 3,72 кг/ч |
| кг/ч параметры | 10 бар, 3.4 сСт, 840 кг/м? |
| Угол распыла | 80° |
| Рисунок распыла | H (полый) |
| Форма | Конус |
| Вес | 0.03 кг |
Replacing the high-pressure nozzle.
Dismantling.
1. Remove the burner.
2. Use a screwdriver to move the ignition electrodes away from the ignition coil and remove them.
3. Remove the washer.
4. If there is a thermal cartridge, remove it along with the washer and open its plug.
5. Remove the nozzle.
Note: when installing the nozzle, keep it clean. Take the nozzle only for 6-sided edging!
Mounting.
1. Screw the nozzle and tighten to 20 Nm.
2. To connect the cartridge, if any.
3. Put on the washer and, if necessary, install a thermal cartridge on it.
4. Install the ignition electrodes.
5. Install the burner.
Nozzle for DW/Thermo 350 reviews
Be the first to write a review of this product!
