Nozzle for DW/Thermo 300

Buy Nozzle for DW/Thermo 300

Art. 1319453A 0,85 гл/ч, 3,31кг/ч 80° H серия OD для DW/Thermo 300 Number of Danfoss 030H8918

1319453A
In stock
$42.50

Applicability:

  • Webasto Thermo 300,
  • Webasto DW300
  • Webasto DBW300

Производительность 0,85 USgal/h
USgal/h параметры 7 бар, 3.4 сСт, 820 кг/м?
Производительность 3,31 кг/ч
кг/ч параметры 10 бар, 3.4 сСт, 840 кг/м?
Угол распыла 80°
Рисунок распыла H (полый)
Форма Конус
Вес 0.03 кг

Replacing the high-pressure nozzle.
Dismantling.

1. Remove the burner.

2. Use a screwdriver to move the ignition electrodes away from the ignition coil and remove them.

3. Remove the washer.

4. If there is a thermal cartridge, remove it along with the washer and open its plug.

5. Remove the nozzle.

Note: when installing the nozzle, keep it clean. Take the nozzle only for 6-sided edging!

Mounting.

1. Screw the nozzle and tighten to 20 Nm.

2. To connect the cartridge, if any.

3. Put on the washer and, if necessary, install a thermal cartridge on it.

4. Install the ignition electrodes.

5. Install the burner.

Nozzle for DW/Thermo 300 reviews

Be the first to write a review of this product!

See also