Nozzle for DW/Thermo 230

Buy Nozzle for DW/Thermo 230

Art.1319452A
0,65 гл/ч, 2,67кг/ч 80° H серия OD для DW/Thermo 230 Replacement: 470716 Number of Danfoss 030H8914

1319452A
In stock
$40

Applicability

  • Thermo 230
  • DW 230
  • DBW 2020

Производительность0,65 USgal/h
USgal/h параметры7 бар, 3.4 сСт, 820 кг/м?
Производительность2,67 кг/ч
кг/ч параметры10 бар, 3.4 сСт, 840 кг/м?
Угол распыла80°
Рисунок распылаH (полый)
ФормаКонус
Вес0.03 кг

Replacing the high-pressure nozzle.

Dismantling.

1. Remove the burner.

2. Use a screwdriver to move the ignition electrodes away from the ignition coil and remove them.

3. Remove the washer.

4. If there is a thermal cartridge, remove it along with the washer and open its plug.

5. Remove the nozzle.

Note: when installing the nozzle, keep it clean. Take the nozzle only for 6-sided edging!

Mounting.

1. Screw the nozzle and tighten to 20 Nm.

2. To connect the cartridge, if any.

3. Put on the washer and, if necessary, install a thermal cartridge on it.

4. Install the ignition electrodes.

5. Install the burner.

Nozzle for DW/Thermo 230 reviews

Be the first to write a review of this product!

See also