Eberspacher HYDRONIC III D5E 12v (diesel) with installation kit
The pre-launch Eberspacher HYDRONIC III D5E 12v heater (diesel) will become for you simply irreplaceable assistant. If you at least once had to warm up in the frosty morning the engine, freezing in salon, you appreciate this device!
Rated voltage — 12 V. Model are suitable for cars, pickups and motor vans with the gasoline engine from 2 to 5 liters. The governing body isn't included in the package of delivery and is acquired separately. The complete set included a mounting kit.
TECHNICAL CHARACTERISTICS OF THE HEATING DEVICE USING DIESEL FUEL | ||||
Type of the heating device | Hydronic S3 | |||
Execution of the heating device | D 4 E | D 5 E | ||
heat carrier | Mix of water and antifreeze (An antifreeze share from 10% to 50%) | |||
Fuel | Diesel fuel – trade quality (DIN EN 590) Is allowed addition of max. 20% of FAME according to DIN EN 14214. | |||
nominal voltage | 12 V | |||
operating range | Max | Min | Max | Min |
Heat flux (W) | 4300 | 1300 | 5000 | 1300 |
Fuel usage (l/h) | 0,53 | 0,15 | 0,59 | 0,15 |
Average electric power (W) without water pump, without car fan relay |
27 | 5 | 32 | 5 |
Operating range Lower bound of tension: The protection against minimum voltage which is built in the control package switches-off the heating device at achievement of border of tension. | 10,5 В | |||
Upper bound of tension: The protection against retension which is built in the control package switches-off the heating device at achievement of border of tension | 16 В | |||
allowable working pressure | 2,5 бар | |||
Amount of water in the heating device | ок. 0,09 л | |||
The minimum flow capacity of the heating device on water | 300 l/h | |||
Admissible ambient temperature | от -40 °C до +105 °C | |||
Weight – without cooling liquid and mounting parts / with a mounting kit | ок. 2кг / 9 кг |
Weight | 8 kg |
Eberspacher HYDRONIC III D5E 12v (diesel) with installation kit reviews
Be the first to write a review of this product!