Eberspacher HYDRONIC D 10 24v (diesel, without assembly set)

Buy Eberspacher HYDRONIC D 10 24v (diesel, without assembly set)

Eberspacher HYDRONIC D 10 12B is applied for: • Heating of glasses, their defrosting and removal of condensate • Heating and maintenance of temperature in: – to a cabin of the driver or working cabin – cargo rooms – ship rooms – inhabited and office compartments – engines of cars and their units. The model is suitable for engines of 5 and more liters. 252161050000 25.2161.05.0000 25 2161 05 0000

252161050000
$1,010

The prestarting Eberspacher HYDRONIC 10 24B heater will become for you simply irreplaceable assistant. If you at least once had to warm up in the frosty morning the engine, freezing in salon, you appreciate this device!

Rated voltage — 24 V. Model are suitable for diesel engines of 5 and more liters:

• Vehicles of all types
• Construction cars
• Farm vehicles
• Boats, vessels and yachts.

Set of delivery of the heater:

The heater with the circulation pulser, the fuel pump and the relay is included in the package of delivery.

The governing body and assembly set aren't included in the package of delivery and is acquired separately.

Structure of the HYDRONIC D10 heater.
The heater consists of the following main components:

- Heat exchanger

- The combustion chamber with a spherical pipe

- Air supercharger

- Control unit.

1 Casing
2 The supercharger of air in the combustion chamber (put
sealing weight on the forward party)
3 Combustion chamber casing
4 The combustion chamber with a spherical pipe
5 Consolidations for the combustion chamber
6 Water pump
7 Temperature sensor
8 Overheating sensor
9 Burning sensor
10 Glow plug
11 A cable plait with a pro-rate
11a Plug
12 The heat exchanger (put sealing weight on
forward party)
13 Casing
14 M5 x 55 / DIN 912 screw
15 Washer of A5,3/DIN 125
16 Consolidation (remove a protective film, paste
consolidation in poses. 2)
17 Consolidation
18 Plug
19 Hose collar
20 Sealing ring 107,54 x 3,53
21 Sealing ring 7 x 2
22 Sealing ring 19,8 x 2,3
23 The screw with a sfero-cylindrical head of M4 x 12/DIN
7985-1.4301 TORX
24 Elastic washer of A4/DIN 137 ZN 12
25 M5 x 12 TAPTITE / DIN 7985 TORX screw
26 M5 x 12 TAPTITE / DIN 965 TORX screw
27 Fastening of a cable
28 Control unit
29 A gear ring with the adjusting screw
30 M4 x 16 TAPTITE / DIN 7985 TORX screw
31 Cable coupler 2,5 x 100
32 A cover of the supercharger of air in the combustion chamber
33 The screw with a secret head of M4 x 12 with internal
hexagon / DIN 7991


Principle of action of HYDRONIC D10.

At inclusion the control bulb on the control panel lights up (pass the relay, the modular relay).
The water pump and the supercharger of air turns on in the combustion chamber, and according to the set program with preliminary washing and calcinating by inclusion of a bayonet electrode of incandescence and
the fuel dosing pump burning process begins. At formation of stable process of burning
through certain time bayonet the electrode of incandescence is disconnected.

At the first start the heating device works at a step "POWER" until
• temperature of cooling liquid won't exceed a threshold "POWER" / "HIGH" or
• the maximum operating time won't be exceeded at 2 o'clock.

In conclusion the heating device depending on the needs for heating switches to steps
"HIGH – AVERAGE – SMALL – VYKL". If the need for heating at a step "SMALL" it is so small that temperature of cooling liquid reaches 85 °C, then the heating device passes from a step "SMALL" to a step of "VYKL". It is in conclusion made inertial выбег within 210 seconds. The water pump continues
to work before the following start of the heating device. After cooling of cooling liquid approximately
up to 68 °C the heating device is started at a step "AVERAGE". At achievement by cooling liquid
temperature about 55 °C the temperature sensor starts the car cooling system fan.


Weight 8 kg

Tags: HYDRONIC D 10 24v 252161050000

Eberspacher HYDRONIC D 10 24v (diesel, without assembly set) reviews

Be the first to write a review of this product!