Atlant Smart 1.5 kW
Pre-electric heater with forced circulation of coolant, additional protection sensor overheat at a low level of antifreeze.The main difference from the heaters working on the principle of natural convection, is the installation of a heater in the heating chamber of an electromagnetic pump with a impeller, which provides a more uniform and rapid heating of the engine. The small size of the heater greatly facilitate its installation in the tight engine compartment Of your car. The pump operates until the heater is switched off from the mains 220V, does not depend on temperature regulators.
TECHNICAL DATA OF ELECTRIC
The weight of the heater 1081 grams
Current type AC frequency 50Hz
Reset temperature ( power-on) thermostat, ° C 65 °C
Temperature of operation (shut-off) of the thermostat, ° C 85°C (emergency 100°C)
Outlet / inlet, mm 12
Diameter 17 mm
Rated voltage 220 V
Power consumption 1.5 KW
Euro fork standard
Flow circulation, l/s 0.30 l / s
Delivery set:
Electric heater 1 PC.
Bumper connector-1pc.
Bracket-1 PC.
Bolt M6x30 — 2 PCs.
Nut M6 — 2 PCs.
Washer M6 — 2 PCs.
Washer M6(Grover) - 2 PCs . Fitting to 1/8" - 1 PC — Fitting to 1/4" - 1 PC — Tee (16x16)— 2 PCs.
Tee (16x32) -1 PCs.
Tee (20*16*20) - 1 PC.
Tee (16\18*16*18\16)— 1 PCs.
adapter 16*18 — 2 PCs.
Worm clamp (16x27) - 6 PCs — Clamp-tie (nylon) - 2 PCs — Sleeve 16x25 L 500 - 1 PC.
Atlant Smart 1.5 kW reviews
Be the first to write a review of this product!