Eberspacher HYDRONIC D5W S 12v (diesel)

Buy Eberspacher HYDRONIC D5W S 12v (diesel)

Eberspacher HYDRONIC D5W S 12B is applied for: • Heating of glasses for their defrosting and removals of condensate • Heating and maintenance of temperature in: – to a driver's cab or working cabin – cargo rooms – ship rooms – inhabited and office compartments – engines of vehicles and them units. 252386050000 25.2386.05.0000 25 2386 05 0000

252386050000
Out of stock
$717

The pre-launch HYDRONIC D5W S 12B heater will become for you simply irreplaceable assistant. If you at least once had to warm up in the frosty morning the engine, freezing in salon, you appreciate this device!

Rated voltage — 12 V. Model are suitable for cars, pickups and motor vans the sbenzinovy engine from 2 to 5 liters. The governing body isn't included in the package of delivery and is acquired separately. The complete set included a mounting kit.

Set of delivery of the heater:

Heater
The fuel pump with a fastening bracket
Water hose 2,2 meters
Bracket for fastening of the heater
The muffler on an entrance of a combustion air
Muffler of exit gases
Muffler pipe 1 meter
Fuel tube of 5 meters
Wiring harness with a block of safety locks
The relay for turning on of the fan of the oven of salon
Package of plugs, fixture, couplers, bolts and nuts, collars, etc. adjusting elements.


Structure of the HYDRONIC D5W S heater.

The heater consists of the following main components:

- An air pump in a combustion tube with a cover
- A combustion tube with a spherical pipe
- Heat exchanger
- Control package
- Circulator

Operation principle of HYDRONIC D5W S.

At inclusion the control lamp on the control panel (the minirelay, the modular relay) lights up. The water pump and according to the set program with preliminary washing and calcinating by inclusion of an air pump in a combustion tube turns on, a bayonet electrode of incandescence and the fuel dosing pump burning process begins.
At formation of stable process of burning through certain time bayonet the electrode of incandescence is disconnected.

Depending on the necessary heating temperature change of productivity of HYDRONIC on steps is carried out:
"High" and "small". At the same time temperature thresholds are rigidly programmed in an electronic control unit.
If the need for heating at a step "SMALL" it is so small that temperature of cooling liquid
reaches 85 °C, the heating device passes to a step "OFF". Inertial runout during apprx. 130 seconds is in conclusion made. The control lamp burns, the water pump also continues to work during a regulation pause.

and, collars, etc. adjusting elements.

Structure of the HYDRONIC D5W S heater.

The heater consists of the following main components:

- An air pump in a combustion tube with a cover - the Combustion tube with a spherical pipe - the Heat exchanger - the Control package

- Circulator

Operation principle of HYDRONIC D5W S.

At inclusion the control lamp on the control panel (the minirelay, the modular relay) lights up. The water pump and according to the set program with preliminary washing and calcinating by inclusion of an air pump in a combustion tube turns on, a bayonet electrode of incandescence and the fuel dosing pump burning process begins. At formation of stable process of burning through certain time bayonet the electrode of incandescence is disconnected.

Depending on the necessary heating temperature change of productivity of HYDRONIC on steps is carried out: "High" and "small". At the same time temperature thresholds are rigidly programmed in an electronic control unit. If the need for heating at a step "SMALL" it is so small that temperature of cooling liquid reaches 85 °C, then the heating device passes to a step "OFF". Inertial runout during apprx. 130 seconds is in conclusion made. The control lamp burns, the water pump also continues to work during a regulation pause.

Weight 8 kg

Tags: 252386050000 D5WS

Eberspacher HYDRONIC D5W S 12v (diesel) reviews

Be the first to write a review of this product!